Dodge Ram: Replace Fuel Filter from Gasoline Engine?

How to replace Fuel filter and pressure regulator from fuel assembly on dodge ram.

The details are mentioned below.

The mentioned procedure is for all U.S. and Canadian models of the Dodge Ram 1500, 2500, 3500, 2WD & 4WD, From Year 2001 - 2005.

The details and diagram are as follows:-----

1. Relieve the fuel system pressure.
2. Remove or disconnect the following:
   
   
   Negative battery cable

   Fuel tank
3. Pull the filter/regulator out of the rubber grommet. Cut the hose clamp and remove the fuel line. 
   
   
   
   Fig. Pull and twist the filter/regulator to remove it from the top of the fuel pump module
   Pull and twist the filter/regulator to remove it from the top of the fuel pump module

To install:

1. Install the filter/regulator with a new clamp and push it into the rubber grommet.
2. Install or connect the following:
   
   
   Fuel tank

   Negative battery cable
3. Start the engine and check for leaks.

These details will help.

Thanks.           

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html