Replacing Timing Belt on 2003 Ford Focus?

Timing Belt

Removal & Installation

2.0L (VIN P) Engines

Fig. Align the timing marks before removing or installing the timing belt-2.0L (VIN P) engine

1. Remove or disconnect the following:
   
   
   Negative battery cable

   Accessory drive belt and tensioner

   Timing belt cover

   Right front wheel

   Right inner splash shield

   Crankshaft pulley
2. Align the timing marks as shown.
3. Refer to the illustration and remove the timing belt as follows:
   1. Loosen the timing belt tensioner bolt (1).
   2. Use an 8mm Allen wrench, and turn the tensioner (2) counterclockwise¹ / ₄ turn.
   3. Insert a ¹ / ₈ inch drill bit in the hole (3) to lock the belt tensioner in place.
   4. Remove the timing belt (4).
      
      
      

      

      Fig. Remove the timing belt by following these 4 numbered steps (refer to the text for an explanation)-2.0L (VIN P) engine

To install:

1. Install the timing belt in a counterclockwise direction starting at the crankshaft.
2. Remove the drill bit to unlock the timing belt tensioner.
3. Rotate the crankshaft two complete turns and check that the timing marks align.
4. Tighten the tensioner bolt to 15-22 ft. lbs. (20-30 Nm).
5. Install or connect the following:
   
   
   Crankshaft pulley. Tighten the bolt to 81-96 ft. lbs. (110-130 Nm).

   Right inner splash shield

   Right front wheel

   Timing belt cover

   Accessory drive belt and tensioner

   Negative battery cable
6. Start the engine and check for proper operation.

---------------