BannerFans.com

Monday, March 12, 2012

2006 AND 2007 Ford Focus Accessory Drive Belts Replacing PROCEDURE?


Accessory Drive Belts
ADJUSTMENT
DRIVE BELT ROUTINGS
INSPECTION
REMOVAL & INSTALLATION
 Details are as follows :---

Adjustment



Belt tension is automatically maintained by a spring-loaded tensioner. No adjustment is necessary.

Drive Belt Routings





Click image to see an enlarged view
Fig. Accessory drive belt routing-2.0L (VIN N) and 2.3L (VIN Z) engine

Inspection



Inspect the drive belt for signs of glazing or cracking. A glazed belt will be perfectly smooth from slippage, while a good belt will have a slight texture of fabric visible. Cracks will usually start at the inner edge of the belt and run outward. All worn or damaged drive belts should be replaced immediately.

Removal & Installation



2.0L (VIN N) & 2.3L (VIN Z) Engine
  1. Before servicing the vehicle, refer to the Precautions section.
  2. With the vehicle in NEUTRAL, position it on a hoist.
  3. Remove the splash shield
  4. Rotate the accessory drive belt tensioner.
  5. Remove the accessory drive belt.

    Click image to see an enlarged view
    Fig. Location of splash shield and removal.
To install:
  1. Rotate the accessory drive belt tensioner.
  2. Route the drive belt.
  3. Slowly release the tensioner
  4. Reinstall the splash shield.

This details will help.


No comments:

Post a Comment