The Procedure mentioned Covers Dodge Ram 1500, 2500, 3500, 2WD & 4WD. Its For 2001 – 2005 Year Models.
The complete procedure to replace Camshaft on Dodge ram.
The procedure covers following engine models.
3.9L, 5.2L & 5.9L Engines
Car repair guide?
http://technoanswers.blogspot.in/2012/03/car-repair-guide.html
The complete procedure to replace Camshaft on Dodge ram.
The procedure covers following engine models.
3.9L, 5.2L & 5.9L Engines
- Before servicing the vehicle, refer to the Precautions Section.
- Drain the cooling system.
- Recover the A/C refrigerant, if equipped with air conditioning.
- Set the crankshaft to Top Dead Center (TDC) of the compression stroke for the No. 1 cylinder.
- Remove or disconnect the following:
NOTEKeep all valvetrain components in order for assembly.
Negative battery cableAccessory drive beltPower steering pumpWater pumpRadiatorA/C condenserGrilleCrankshaft damperFront coverValve coversDistributorIntake manifold
Rocker arms and pushrodsHydraulic liftersTiming chain and sprocketsCamshaft thrust plate and chain oil tabCamshaft
To install:
- Install or connect the following:
CamshaftCamshaft Holding Tool C-3509Camshaft thrust plate and chain oil tab. Tighten the bolts to 18 ft. lbs. (24 Nm).Timing chain and sprockets. Tighten the camshaft sprocket bolt to 50 ft. lbs. (68 Nm). - Remove the camshaft holding tool.
- Install or connect the following:
Hydraulic lifters in their original positionsRocker arms and pushrods in their original positionsIntake manifoldDistributorValve coversFront coverCrankshaft damperGrilleA/C condenserRadiatorWater pumpPower steering pumpAccessory drive beltNegative battery cable - Fill the cooling system.
- Recharge the A/C system, if equipped.
- Start the engine and check for leaks.
These details will help.
Thanks.
FOR MORE HELP GO TO: ---
No comments:
Post a Comment