Chevy Malibu Blower Motor Resistor replacing procedure?

The details to replace blower motor resistor is provided in this chapter.

The Chevy Malibu blower motor resistor removal is as follows:----

1. Remove the blower motor resistor wire harness connector.
2. Remove the blower motor resistor screws.
3. Remove the blower motor resistor. 
   
   
   
   Fig. Blower motor resistor removal

To install:

1. Install the blower motor resistor.
2. Tighten the blower motor resistor screws to 13 inch. lbs. (1.5 Nm).
3. Install the blower motor resistor wire harness connector.
4. Install the right closeout panel.

These details will help.

Thanks.           

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html