BannerFans.com

Saturday, October 29, 2011

how to remove Bowden Control Cables on 2003 Ford Focus?

CONTROL CABLES :---

Removal & Installation


  1. Before servicing the vehicle, refer to the Precautions section.
  2. Disconnect battery negative cable from battery and properly isolate to prevent accidental reconnection.
  3. Remove or disconnect the following:
    NOTE
    To remove the Bowden cables, turn the rotary switches as far as they will go to the left.



    Radio/cassette unit and the CD player, if equipped
    Bezel with heater/air conditioning controls
    Seven electrical connectors
  4. Unclip the Bowden cables.

    Lower driver's side footwell trim
    Bowden cables

    Click image to see an enlarged view
    Fig. Bowden cable layout.
To install:

NOTE
Route the new Bowden cables without kinks and check for easy accessibility.


NOTE
To install the Bowden cables, turn the rotary switches as far as they will go to the left. The mechanism engages easily in this position.


NOTE
The Bowden cables are identical for RHD and LHD vehicles, although they are fastened to the air flap operating mechanism with the reverse side of their connectors.

  1. Install or connect the following:

    Bowden cables
    Lower driver's side footwell trim
    Seven electrical connectors
    Bezel with heater/air conditioning controls
    Radio/cassette unit and the CD player, if equipped.
    Negative battery cable

-----------

Car AC Blows Warm Air ?


How to test AUTO AC pressure?


AUTO Air Conditioning Troubleshooting?



AUTO A/C COOLING PROBLEM?


Fixing refrigerant leak?


How to locate Car AC Refrigerant leak?


CAR AC INTERMITTENT COOLING?


What causes INTERMITTENT COOLING on Car AC system?


Car AC making Noise?


BAD ODOR ON CAR AIR CONDITIONER?



How to Recharge Car's Air Conditioner

1 comment:

  1. I am really surprised while reading this post as each and every sentence seems reliable which clearly shows that it is written after a good research on the topic. Oil Skimmer in Delhi To know much more information, just go through Clear Ion Experts from the technicians.

    ReplyDelete