The procedure is similar for Ford Crown Victoria, Mercury Grand Marquis, Lincoln Town Car.
Accessory Drive Belts
ADJUSTMENT
BELT ROUTINGS
INSPECTION
REMOVAL & INSTALLATION
Instructions are as follows:-----
Adjustment
Specific to:
Ford Crown Victoria 2008-2009
Lincoln Town Car 2008-2009
Mercury Grand Marquis 2008-2009
The accessory drive belt tension is automatically adjusted with a spring-loaded tensioner.
Belt Routings
Specific to:
Ford Crown Victoria 2008-2009
Lincoln Town Car 2008-2009
Mercury Grand Marquis 2008-2009
Fig. Accessory drive belt routing-4.6L (VIN V and W) engines
Inspection
Specific to:
Ford Crown Victoria 2008-2009
Lincoln Town Car 2008-2009
Mercury Grand Marquis 2008-2009
Inspect the drive belt for signs of glazing or cracking. A glazed belt will be perfectly smooth from slippage, while a good belt will have a slight texture of fabric visible. Cracks will usually start at the inner edge of the belt and run outward. All worn or damaged drive belts should be replaced immediately.
Removal & Installation
Specific to:
Ford Crown Victoria 2008-2009
Lincoln Town Car 2008-2009
Mercury Grand Marquis 2008-2009
- Before servicing the vehicle, refer to the precautions in the beginning of this section.
- Disconnect battery negative cable from battery and properly isolate to prevent accidental reconnection.
- Rotate the tensioner clockwise and remove the drive belt.
Fig. Accessory drive belt tensioner
To install:
- Rotate the tensioner clockwise.
- Route the belt around the pulleys.
- Slowly release the tensioner.
This details will help.
Thanks.
FOR MORE HELP GO TO: ---
No comments:
Post a Comment