How to Remove Hvac Control Panel on Ford, Mercury and Lincoln?

The procedure is similar for Ford Crown Victoria, Mercury Grand Marquis, Lincoln Town Car. 

 Hvac Control Panel Removal & Installation instructions are as follows:----

CAUTION

Some models covered by this manual may be equipped with a Supplemental Restraint System (SRS), which uses an air bag. Whenever working near any of the SRS components, such as the impact sensors, the air bag module, steering column and instrument panel, disable the SRS, as described in Section 6.

1. Depower the Supplemental Restraint System (SRS).
2. Detach the finish panel.
3. Disconnect the electrical connector.
4. Remove the 4 HVAC module screws.
5. Remove the HVAC module. Remove the nuts and disconnect the vacuum harness. Disconnect the wire harness connectors and remove the HVAC module.
6. To install, reverse the removal procedure. 
    
   
   Fig. Removing the control module

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html