Tuesday, March 13, 2012

Replacing Air Conditioning & Heater Unit on Ford E series?

Air Conditioning & Heater Unit
REMOVAL & INSTALLATION Details are As follows:----

Before servicing the vehicle, refer to the Precautions Section.
Drain the engine cooling system.
Properly recover the A/C refrigerant.
Remove the rear seats to access the LH rear quarter trim panel.
Remove the body side trim finish panel.
Disconnect the powerpoint electrical connector, if equipped.
Pry the rear seat shoulder strap covers from the upper trim panels.
Pull the rear door weatherstrip off at the rear door opening to access the trim panel pin-type retainers.
Remove the rear upper quarter trim panel.
Remove the lower quarter trim panel.
Remove the window latches.
Disconnect the heater hoses from the auxiliary heater core.
Disconnect the auxiliary evaporator outlet and inlet line spring lock couplings and discard the O-ring seals.
Remove the auxiliary plenum chamber.
Remove the screws and remove the auxiliary A/C and heater assembly.
Installation is the reverse order of removal.
Refill the engine cooling system to the correct level.

This details will help.


Car repair guide?

No comments:

Post a Comment