Chrysler Crossfire Intake Manifold replacing details?

Complete procedure to replace Intake Manifold.

The step by step info to remove/ install intake manifold is as follows :---

1. Drain the cooling system.
2. Properly relieve the fuel system pressure.
3. Remove or disconnect the following: 
   
   
   Negative battery cable

   Air intake assembly

   Mass Air Flow (MAF) sensor

   Fuel rail and injectors

   Vacuum lines

   Engine wiring connectors

   EGR pipe at EGR valve

   Air pump switchover valves

   Intake manifold
    

   Fig. Exploded view of the intake manifold

To install:

1. Install or connect the following:
   
   
   Intake manifold using new gaskets. Torque the bolts to 15 ft. lbs. (20 Nm).

   Air pump switchover valves

   EGR pipe at EGR valve and tighten to 30 ft. lbs. (40 Nm)

   MAF sensor

   Engine wiring connectors

   Vacuum lines

   Fuel rail and injectors

   Air intake assembly

   Negative battery cable
2. Fill and bleed the cooling system.
3. Start the engine and check for leaks.

These details will help.

Thanks.           

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html