Procedure To Replace Timing Belt Rear Cover On Dodge and Chrysler?

The Details procedure on How to replace Timing Belt Rear Cover.

Please Note that this Procedure Covers all U.S. and Canadian models of the Chrysler/Dodge Avenger, Chrysler Sebring Coupe and Dodge Stratus/ Stratus Coupe models for Year 1999 to 2005.

The Rear timing belt cover removal is as follows:---

1. Remove the upper and lower front timing belt covers.
2. Remove the timing belt.
3. Remove the timing belt idler pulley.
4. Remove both camshaft sprockets. Hold the camshaft sprockets with Special Tool 6847 while removing the center bolts.
5. Remove the rear timing belt cover fasteners and remove the cover from the engine. 
   
   
   
   Fig. Remove the rear timing belt cover fasteners-2.4L engine

To install:

1. Install the rear timing belt cover and fasteners. Torque the fasteners to specified values
   
   
   The M6 Bolts: 106 inch lbs. (12 Nm)

   The M8 Bolts: 21 ft. lbs. (28 Nm)
2. Install the camshaft sprockets. Hold the camshaft sprockets with Special Tool 6847 while tightening the center bolts to 85 ft. lbs. (115 Nm).
3. Install the timing belt idler pulley.
4. Install the timing belt.
5. Install the upper and lower front timing belt covers.

These details will help.

Thanks.           

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html