Procedure to replace steering wheel.
The complete details and diagrams are provided to complete this task.
The Steering Wheel Replacing procedure is as follows:-----
Car repair guide?
http://technoanswers.blogspot.in/2012/03/car-repair-guide.html
The complete details and diagrams are provided to complete this task.
The Steering Wheel Replacing procedure is as follows:-----
NOTE
This procedure requires the use of a steering wheel puller, special tool J1859A and J36541A.
- Remove the inflatable restraint steering wheel module.
- Reposition the locking tab on the steering wheel nut.
- Remove the steering wheel nut.
- Remove the steering wheel nut locking tab.
- Matchmark the steering wheel to the steering column.
WARNINGWhen removing the steering wheel, use only the specified steering wheel puller. Do not hammer on the end of the steering column shaft. Hammering could loosen the plastic injections which maintain the steering column rigidity.
- Pull off the steering wheel using J 1859-A and J-36541-A .
To install:
- Install the steering wheel to the column using the matchmarks.
- Install the steering wheel nut locking tab.
- Install the steering wheel nut and tighten to 21 ft. lbs (28 Nm).
- Secure the nut with the locking tab.
- Install the inflatable restraint steering wheel module.
These details will help.
Thanks.
FOR MORE HELP GO TO: ---
No comments:
Post a Comment