BannerFans.com

Saturday, April 7, 2012

Canyon, Colorado Blend Door Actuator Removal?

Covers All U.S. And Canadian Models Of Chevrolet Canyon And GM Colorado.

In this chapter the details are provided for Blend door actuator removal.
Please note in Blend door actuator there are 4 Key Parts.
The replacement is for all this Parts.
This parts are as follows:-----

AIR TEMPERATURE DOOR
DEFROSTER DOOR
MODE ACTUATOR
RECIRCULATION ACTUATOR.

The details  are as follows:-----


Air Temperature Door



  1. Remove the HVAC module assembly.
  2. Remove screws in order to separate the HVAC module assembly.
  3. Remove the air temperature cam screw.
  4. Remove the air temperature cam.
  5. Remove the air temperature door linkage.
  6. Separate the HVAC module case halves.
  7. Remove the air temperature door.
To install:
  1. Install the air temperature door to the HVAC module.
  2. Assemble the HVAC module case halves.
  3. Install the air temperature door linkage.
  4. Install the screws in order to assemble the HVAC module.
  5. Install the air temperature cam.
  6. Install the screw to the air temperature cam.
  7. Install the HVAC module assembly.

Defroster Door



  1. Remove the HVAC module assembly.
  2. Remove all retaining screws from the HVAC module case halves.
  3. Separate the HVAC module case .
  4. Remove the screw from the mode cam.
  5. Remove the mode cam.
  6. Remove the defrost door linkage from the defrost door.
  7. Remove the defroster door from the HVAC module assembly.
To install:
  1. Install the defroster door from the HVAC module assembly.
  2. Install the defrost door linkage from the defrost door.
  3. Install the mode cam.
  4. Install the screw to mode cam.
  5. Assemble the HVAC module case.
  6. Install the screws to the HVAC module case.
  7. Install the HVAC module.

Mode Actuator



  1. Remove the HVAC module assembly.
  2. Remove the screws from the HVAC module assembly.
  3. Remove the screw from the mode cam.
  4. Remove the mode cam from the HVAC module assembly.
  5. Separate the HVAC module assembly halves.
  6. Remove the mode door linkage from the mode door.
  7. Remove the mode door from the HVAC module assembly.
To install:
  1. Install the mode door to the HVAC module assembly.
  2. Install the mode door linkage to the mode door.
  3. Assemble the HVAC module assembly halves.
  4. Install the mode cam to the HVAC module assembly.
  5. Install the mode cam screw.
  6. Install the screws to the HVAC module assembly.
  7. Install the HVAC module assembly.

Recirculation Actuator



  1. Remove the HVAC module assembly.
  2. Remove all retaining screws from the HVAC module case halves.
  3. Separate the HVAC module case.
  4. Remove the screws retaining the recirculation actuator from the HVAC module assembly.
  5. Remove the electrical connector from the recirculation actuator.
  6. Remove recirculation actuator.
  7. Remove the recirculation door from the recirculation assembly.
To install:
  1. Install the recirculation door to the recirculation assembly.
  2. Install the recirculation actuator.
  3. Install the screws to the recirculation actuator.
  4. Connect the electrical connector.
  5. Assemble the HVAC module case halves.
  6. Install the screws to assemble the HVAC module case halves.
  7. Install the HVAC module assembly.




These details will help.
Thanks.           

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html


No comments:

Post a Comment