How to Replace Accessory Drive Belts on Toyota Tacoma?

In this chapter the details are provided for Accessory Drive Belts replacing.
The drive belt inspection.The serpentine belt routing diagrams.
The drive belt routing procedure.
And more help for drive belts.


Accessory Drive Belts

INSPECTION
REMOVAL & INSTALLATION

DRIVE BELT ROUTINGS

Inspection

Inspect the drive belt for signs of glazing or cracking. A glazed belt will be perfectly smooth from slippage, while a good belt will have a slight texture of fabric visible. Cracks will usually start at the inner edge of the belt and run outward. All worn or damaged drive belts should be replaced immediately.

Removal & Installation

Fig. Accessory drive belt replacement

1. Before servicing the vehicle, refer to the Precautions section.
2. Loosen the drive belt tension by turning the drive belt tensioner counterclockwise, and remove the drive belt.
3. Installation is the reverse of removal.

Drive Belt Routings

Fig. Accessory drive belt routing-2.4L engine

Fig. Accessory drive belt routing-2.7L (3RZ-FE/M) engine

Fig. Accessory drive belt routing-2.7L (2TR-FE) engine

Fig. Accessory drive belt routing-3.4L engine

Fig. Accessory drive belt routing-4.0L engine

These details will help.

Thanks.

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html