In this chapter details are provided for Dodge Caravan and Chrysler Town and Country Car models.
The Front blower motor removal procedure for both this car model is similar.
Blower motor removal procedure with details and diagrams is as follows:-----
Car repair guide?
http://technoanswers.blogspot.in/2012/03/car-repair-guide.html
The Front blower motor removal procedure for both this car model is similar.
Blower motor removal procedure with details and diagrams is as follows:-----
Removal & Installation
CAUTION
The Supplemental Inflatable Restraint (SIR) system must be disarmed before removing the blower motor assembly. Failure to do so may cause accidental deployment of the air bag, resulting in unnecessary SIR system repairs and/or personal injury.
- Disconnect and isolate the negative battery cable, then wait 2 minutes before proceeding with the removal. This will effectively disable the air bag system preventing possible personal injury.
- Remove the glove box from the instrument panel.
- Remove the A/C-heater blower motor cover.
- Disconnect the blower motor wiring connector.
- Remove the blower motor wiring grommet and feed the wiring through the blower motor housing.
- Remove the blower motor mounting screws.
- Allow the blower motor assembly to drop downward to clear the instrument panel and remove from vehicle.
To install:
- Place the blower motor assembly into position on the A/C-heater unit and tighten the mounting screws.
- Route the blower motor wiring through the blower motor housing and seat the wiring grommet in the hole of the blower motor housing.
- Reconnect the blower motor electrical connector.
- Install the A/C-heater blower motor cover.
- Install the glove box into the instrument panel.
- Reconnect the negative battery cable. Check blower motor operation.
These details will help.
Thanks.
FOR MORE HELP GO TO: ---
No comments:
Post a Comment