The Procedure to replace Upper Intake Manifold Plenum on Cadillac catera car model.
The details and diagrams to complete this task is as follows:-----
Car repair guide?
http://technoanswers.blogspot.in/2012/03/car-repair-guide.html
The details and diagrams to complete this task is as follows:-----
- Remove or disconnect the following:
Negative battery cableIntake plenum air inlet hoses from the throttle bodyBrake booster vacuum hose from the intake plenumWiring harness channel from the plenumSwitch over valve electrical connector and vacuum line
Accelerator, cruise control cables and the bracket from the throttle bodyThrottle body control electrical connectorIdle Air Control (IAC) inlet hose and electrical connectorThrottle Position Sensor (TPS) electrical connectionThrottle body from the intake plenumCrankcase vent tube adapter and cover from the intake plenumIntake plenum and O-rings
To install:
- Install or connect the following:
NOTEBe certain not to strip the threads on the brake booster vacuum hose.
Intake plenum with new O-rings. Torque the bolts to 71 inch lbs. (8 Nm).Crankcase vent tube adapter to the intake plenum. Torque the fastener to 71 inch lbs. (8 Nm).Throttle body to the intake plenum. Torque the fasteners to 106 inch lbs. (12 Nm).TPS electrical connectorIAC electrical connector and vacuum lineThrottle body control electrical connectorAccelerator and cruise control bracket and cables. Torque the bolts to 71 inch lbs. (8 Nm).Electrical connector and vacuum hose to the intake plenum switchover valve solenoidWiring channel to the intake plenum. Torque the bolts to 71 inch lbs. (8 Nm).Threaded brake booster vacuum hose to the intake plenum
Intake plenum air inlet hoses to the throttle bodyNegative battery cable - Start the engine and check for proper performance.
These details will help.
Thanks.
FOR MORE HELP GO TO: ---
No comments:
Post a Comment