The details mentioned will work For Cadillac CTS and DTS car models.
Auxiliary control panel replacing procedure is as follows:-----
Car repair guide?
Auxiliary control panel replacing procedure is as follows:-----
- Remove the Instrument Panel (I/P) accessory trim plate.
- Remove the HVAC control module assembly screws.
- Disconnect the electrical connectors from the HVAC control module assembly.
To install:
- Connect the electrical connectors to the HVAC control module assembly.
- Install the HVAC control module assembly into the I/P.
- Install the HVAC control module assembly screws. Tighten the screws to 17 inch lbs. (1.9 Nm).
- Install the I/P accessory trim plate.
- Reprogram the HVAC control module.
- Before servicing the vehicle, refer to the Precautions Section.
- Using a flat-bladed tool, carefully pry out on the top of the HVAC control-auxiliary.
- Remove the HVAC control-auxiliary from the center console.
- Disconnect the electrical connector.
- Remove the HVAC control-auxiliary.
To install:
- Connect the HVAC control-auxiliary electrical connector.
- Install the HVAC control-auxiliary in the console bottom first.
- Push in at the top of the HVAC control-auxiliary in order to engage the HVAC control -auxiliary in the console.
- Reprogram the HVAC control-auxiliary.
These details will help.
Thanks.
FOR MORE HELP GO TO: ---
No comments:
Post a Comment